Hire Equipment

Choosing to hire reduces capital investment, minimises maintenance costs, avoids delays and eliminates obsolescence.

Clean Lube Solutions offer a range of hire equipment to support  your oil filtration and lubrication management needs.

Below is a list of filtration and associated equipment that has proven invaluable to our customers.

  • Hand Held Filter – 5 lpm
  • Filter Cart – 25 lmp

    Hire Equipment

    Brochure

  • In Line Heater – 18kW
  • Kleentek Electrostatic Varnish Remover
  • Patch Test Kits
  • Portable Particle Counter
  • Portable Bund

We also stock replacement filter elements in a wide variety of micron ratings to meet your requirements.

Our filter trolley and skid rentals are available in a flow rate range from 5 LPM to 250LPM.

18kw In-Line Heater

P/N LL-HT-18-001
Description:
Hire Equipment

Brochure

In-line heater for use on mineral and synthetic oil systems. Typically used on turbine oil or large systems of 8,000 litres or more to assist with flushing, filtration or water removal devices. Mounted to custom trolley. Comes with thermostatic control and over-temperature cut-out. Flashing light fitted to indicate operation.

Specification:

Dimensions: 1300mmH x 350mmW
Power: 18 kW
Wattage: 21 watts/cm2
Thermostat:
Size: 1300mm high x 350mm wide
Weight: Approximately 65 Kg
Material: SS

Filter Trolley ‒ Electric, High Viscosity 25 lts/min

P/N LL-FT-HV-25-001
Description:
Hire Equipment

Brochure

Portable filter trolleys suitable for transferring of new oils from drums to systems and re-circulation of systems. Suitable for oils up to and including 460cSt. Trolley with drip tray, fitted with quality Pall filtration & SRT elements, micron rating to suit, sample valve, camlock fittings, ball valves, either single, 3 phase or air driven, start/emergency stop buttons & 10 metres of electrical lead/plug.

Specification:

Dimensions: 1200mm high x 700mm wide
Drum Spike: With male camlock/cap, desiccant breather,
Weight: Approx. 50 kg.
Flow Rate: 25 litres/min is standard, other flows on Hoses: Delivery & suction with female camlocks & plugs chained in place
Connections: 1” Camlock with cap chained in place Variable Speed Drive: Allows for more viscous oils, soft start

Filter Unit ‒ Electric, Low Viscosity 200 lts/min

P/N: LL-FT-LV-200
Description:
Hire Equipment

Brochure

Mobile filter unit suitable for recirculation of larger oil systems. Suitable for oils up to and including 68cSt. Filter unit has drip tray, fork tines, is fitted with quality Pall filtration & SRT elements, micron rating to suit, sample valves, camlock fittings, ball valves, 3 phase, main isolator, start/emergency stop buttons, power on & filter blocked lights, variable speed drive, 10 metres of electric lead/plug, filter differential blockage gauge & inlet/outlet pressure gauges.

Specification:

Flow Rate: 200 litres/min
Connections: 2” Male Camlock with cap chained in place

Options:

Hoses: Delivery & suction with female camlocks & plugs chained in place

Filter Unit – Hand Held

P/N LL-HFU-05
Description:
Hire Equipment

Brochure

Portable hand carry filter unit suitable for transferring of new oils from drums to systems and re-circulation of systems. Suitable for oils up to and including 460cSt. Fitted with quality Pall filtration & SRT elements, micron rating to suit, camlock fittings, ball valves, single phase, start/emergency stop buttons & 2 metres of electrical lead/plug.

Specification:

Dimensions: 400mmH x 250mmW Drum Spike, 20Ltr or 205 Ltr with male camlock/cap
Weight: 17 Kg desiccant breather
Flow Rate: 4-5 litres/min Hoses: Delivery & suction with female camlocks & plugs
Connections: Camlock with cap chained in place
Single phase electric

Kleentek ELC-R100SP

Description:
Brochure

Brochure

Kleentek Electrostatic Oil Cleaners remove contaminants, like oil oxidation products including varnish, to sub-micron levels and also remove deposits from system internals such as the oil reservoir and pipe work. Used in a multitude of applications that use hydraulic or lubrication oil they increase machine life expectancy and efficiency.

Specification:

Dimensions: 515mm x 1030mm x 1050mm
Weight: 110 kg.
Power: 240VAC/10 Amps or 415VAC
Collector Element: Qty 2 x CC-R50SP
Recommended System Volume: 6,000 ‒ 50,000 litres

Patch Test Kit

Description:
Hire Equipment

Brochure

Complete Patch Test Kit is inclusive of all equipment to prepare analysis membranes and inspect for contamination cleanliness code and observe contamination / wear debris. Comes packed in a 1630 Pelican case with foam. The microscope is inclusive of a USB2 camera and software to observe images real time and 2 x LED light source. Full instructions and Patch Book are included.

Specification:

Overall dimensions: 800mm x 600mm x 450mm
Weight: 32 Kg (including case)

Portable Particle Counter – FS9001

Description:
Hire Equipment

Brochure

Monitoring the trend of system fluid cleanliness as part of a predictive maintenance program helps identify abnormal conditions and potential problems.

The FS9001 is a self contained system complete with integral pump and governed flow rate which provide instant cleanliness readings to allow you to fully understand the condition of your oils and fuels. The powerfull trending software provides graphical display for real-time trend analysis.

A portable particle counter can either be permanently installed on-line to monitor critical applications (e.g. component test facilities) or used as a portable device for routine condition monitoring of various hydraulic, lubrication, and other fluid systems.

Features:

  • Latest laser particle counting technology
  • High and low pressure on-line sampling
  • Off-line (bottle) sampling
  • Performs single counts, timed counts, or continuous counting
  • Wide fluid viscosity range
  • Alerts to presence of waer and diesel bug in fuels
  • Accurate, repeatable, consistent results
  • Low cost

Portable Bund

Description:

2.4m x 2.4m Portable spill containment bund

Brochure

Brochure